Return to normal screen, Engage recorder’s timer mode, Attention – JVC HR-DD857MS User Manual
Page 27
EN
27
RETURN TO NORMAL
SCREEN
5
Press PROG. or OK. "PROGRAM COMPLETED"
appears on the screen for about 5 seconds, then normal
screen appears.
● Repeat steps 1 – 5 for each additional programme.
ENGAGE RECORDER’S
TIMER MODE
6
Press TIMER. The recorder turns off automatically and
‰
appears on the display panel.
● To disengage the timer, press TIMER again.
NOTES:
●
To Change The Stop Time . . .
. . . press STOP +/– after pressing OK in step 3. You can
compensate for anticipated programme schedule delays this
way.
●
To Timer-Record Weekly Or Daily Serials . . .
. . . after pressing OK in step 3, press WEEKLY (NUMBER key
“9”) for weekly serials or DAILY (NUMBER key “8”) for daily
serials (Monday – Friday). Either "WEEKLY" or "DAILY"
appears on the screen. Pressing the button again makes the
corresponding indication disappear.
●
You can programme this recorder to timer-record as many as 8
programmes. If you try to programme the recorder to record a
ninth, "PROGRAM FULL" appears on screen. To record the
extra programme, you must first cancel any unnecessary
programmes (
੬
pg. 30).
●
It is not possible to timer-record a TV programme with a
G-
CODE
number which starts with "0".
ATTENTION
Regarding Guide Program Number Set
"G-CODE SET-UP" appears after performing step 3 if the
Guide Program number for the G-
CODE
number you entered
has not been set.
● Press the NUMBER keys or PUSH JOG %fi to input the
channel position number on which your recorder
receives that station, then press OK or PUSH JOG .
The G-
CODE
program screen appears.
(Ex.) To timer-record a RTR
programme with G-
CODE
.
* If your recorder receives
RTR on the channel position
2, press OK or PUSH JOG
after entering "2".
Satellite Tuner Users
To timer-record a satellite broadcast using G-
CODE
:
1
Perform steps 1 – 6.
2
Set the satellite tuner to the appropriate channel before
the selected programme begins.
3
Leave the satellite tuner's power on.
%
%
1
2
3
4
5
6
7
8
9
0
2
4
1
3
WEEKLY
DAILY
OK
STOP+/–
TIMER
PROG.
PUSH JOG
NUMBER
G-CODE SET-UP
GUIDE PROG
TV PROG
2
– –
[0-9] OR [
5/∞]:SELECT =
[PROG] : EXIT
To timer record with simulcast...
...Press SIMUL after pressing OK in step 3; "SIM" appears on the
right of TV PROG number. Set the FM tuner to the desired
broadcast before the selected programme begins. Then set the
FM tuner's timer. If the tuner doesn't have a timer, leave the
unit's power turned on.