JVC KD-R303 - Manual (Page 15)

ENGLISH
15 SETTINGS & REFERENCES
Category Menu items Selectable settings, [reference page]
AUDIO
BEEP
Keypress tone • BEEP OFF
• BEEP ON : Deactivates the keypress tone.
: Activates the keypress tone.
TEL MUTING
Telephone
muting • MUTING 1/
MUTING 2
• MUTING OFF
: Select either one which mutes the sounds while using a
cellular phone.
: Cancels.
AMP GAIN * 8
Amplifier gain
control
• LOW POWER
• HIGH POWER
: VOLUME 00 – VOLUME 30 (Select if the maximum power
of each speaker is less than 50 W to prevent damaging the
speaker.)
: VOLUME 00 – VOLUME 50
SRC SELECT
AM * 9
AM station
• AM OFF
• AM ON : Disable “AM” in source selection.
: Enable “AM” in source selection, [4].
AUX IN * 10
Auxiliary input
• AUX OFF
• AUX ON : Disable “AUX IN” in source selection.
: Enable “AUX IN” in source selection, [4].
* 8 The volume level automatically changes to “VOLUME 30” if you change to “ LOW POWER” with the volume level
set higher than “VOLUME 30.”
* 9 Displayed only when any source other than “AM” is selected.
* 10 Displayed only when any source other than “AUX IN” is selected.
More about this unit
Basic operations
Turning on the power
• By pressing SRC button on the unit, you can also turn
on the power. If the source is ready, playback also
starts.
Turning off the power
• If you turn off the power while listening to a track,
playback will start from where it had been stopped
previously next time you turn on the power.
General
• If you change the source while listening to a disc,
playback stops.
Next time you select “CD” as the playback source,
playback will start from where it had been stopped
previously.
• After ejecting a disc, “NO DISC” appears and you
cannot operate some of the buttons. Insert another
disc or press SRC to select another playback source.
• If no operation is done for about 30 seconds after
pressing MENU button, the operation will be
canceled.
Tuner operations
Storing stations in memory
• During SSM search...
– All previously stored stations are erased and the
stations are stored anew.
– When SSM is over, the station stored in the lowest
preset number will be automatically tuned in.
• When storing a station manually, the previously
preset station is erased when a new station is stored
in the same preset number.
EN10-17_KD-R303_003A_2.indd 15 EN10-17_KD-R303_003A_2.indd 15 28/8/08 3:43:26 PM 28/8/08 3:43:26 PM