Kd-r304/kd-r204 ui, Instructions/installation, Important for laser products – JVC KD-R303 User Manual

Page 55: Maintenance, More about this unit, Preparations, Cd receiver: instructions/installation, English, Basic operations, Tuner operations

Advertising
background image

1– EN

ENGLISH

KD-R304/KD-R204

CD RECEIVER: INSTRUCTIONS/INSTALLATION

0808DTSMDTJEIN

EN

© 2008 Victor Company of Japan, Limited

Thank you for purchasing a JVC product.
Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best
possible performance from the unit.

Installation/connection are explained at the last section of this manual (reverse page, indicated with

symbol).

GET0566-001A

[UI]

Warning

If you need to operate the unit while driving, be sure to
look around carefully or you may be involved in a traffic
accident.

Caution on volume setting

Discs produce very little noise compared with other sources.
Lower the volume before playing a disc to avoid damaging
the speakers by the sudden increase of the output level.

For safety...

• Do not raise the volume level too much, as this will block

outside sounds, making driving dangerous.

• Stop the car before performing any complicated

operations.

Temperature inside the car...

If you have parked the car for a long time in hot or cold
weather, wait until the temperature in the car becomes
normal before operating the unit.

How to reset your unit

Reset the unit after installation is complete.

• Your preset adjustments will also be erased.

How to forcibly eject a disc

• Be careful not to drop the disc when it ejects.
• If this does not work, reset your unit.

PREPARATIONS

Enter Menu operation.

Select an item.

Basic settings

1

Cancel the display demonstrations

Select “

DEMO,” then “DEMO OFF.”

2

Set the clock

Select “

CLOCK”

=

CLOCK SET.”

Adjust the hour, then press control dial once
to proceed to adjust the minute.

• To return to the previous menu, press BACK.

IMPORTANT FOR LASER PRODUCTS

1. CLASS 1 LASER PRODUCT
2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified

service personnel.

3. CAUTION: Visible and/or invisible class 1M laser radiation when open. Do not view directly with optical instruments.
4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.

[European Union only]

Playing an MP3/WMA disc (for KD-R304)

• This unit can play back MP3/WMA files with the

extension code <.mp3> or <.wma> (regardless of the
letter case—upper/lower).

• This unit can show the names of albums, artists

(performer), and tag (Version 1.0, 1.1, 2.2, 2.3, or 2.4) for
MP3 files and for WMA files

• This unit can display only one-byte characters. No other

characters can be correctly displayed.

• This unit can play back MP3/WMA files meeting the

conditions below:

– Bit rate: 8 kbps — 320 kbps
– Sampling frequency:
48 kHz, 44.1 kHz, 32 kHz (for MPEG-1)
24 kHz, 22.05 kHz, 16 kHz (for MPEG-2)
– Disc format: ISO 9660 Level 1/ Level 2, Romeo, Joliet,

Windows long file name

• The maximum number of characters for file/folder names

vary depending on the disc format used (includes 4
extension characters—<.mp3> or <.wma>).

– ISO 9660 Level 1: up to 12 characters; ISO 9660 Level

2: up to 31 characters; Romeo: up to 128 characters;
Joliet: up to 64 characters; Windows long file name: up
to 128 characters

• This unit can recognize a total of 512 files, 255 folders,

and 8 hierarchical levels.

• This unit can play back files recorded in VBR (variable bit

rate).

Files recorded in VBR have a discrepancy in the elapsed

time display, and do not show the actual elapsed time.
In particular, this difference becomes noticeable after
performing the search function.

• This unit cannot play back the following files:
– MP3 files: encoded in MP3i and MP3 PRO format; an

inappropriate format; layer 1/2.

– WMA files: encoded in lossless, professional, and voice

format; not based upon Windows Media® Audio; copy-
protected with DRM.

– Files which have data such as AIFF, ATRAC3, etc.
• The search function works but search speed is not

constant.

Title assignment

• If you try to assign titles to more than 30 station

frequencies, “NAME FULL” appears. Delete unwanted
titles before assignment.

Basic operations

• By pressing SRC on the unit, you can also turn on the

power. If the source is ready, playback also starts.

• If you turn off the power while listening to a track,

playback will start from where it had been stopped
previously next time you turn on the power.

• If no operation is done for about 30 seconds after

pressing MENU button, the operation will be canceled.

Tuner operations

• During SSM search...
– All previously stored stations are erased and the

stations are stored anew.

– When SSM is over, the station stored in the lowest

preset number will be automatically tuned in.

Disc operations

Caution for DualDisc playback

• The Non-DVD side of a “DualDisc” does not comply with

the “Compact Disc Digital Audio” standard. Therefore,
the use of Non-DVD side of a DualDisc on this product
may not be recommended.

General

• This unit has been designed to reproduce CDs/CD Texts,

and CD-Rs (Recordable)/CD-RWs (Rewritable) in audio
CD (CD-DA) and MP3/WMA (for KD-R304) formats.

Playing a CD-R or CD-RW

• Use only “finalized” CD-Rs or CD-RWs.
• This unit can play back multi-session discs; however,

unclosed sessions will be skipped while playing.

• Some CD-Rs or CD-RWs may not be played back on this

unit:

– Discs are dirty or scratched.
– Moisture condensation has occurred on the lens inside

the unit.

– The pickup lens inside the unit is dirty.
– The files on the CD-R/CD-RW are written using the

“Packet Write” method.

– There are improper recording conditions (missing data,

etc.) or media conditions (stained, scratched, warped,
etc.).

• CD-RWs may require a longer readout time since the

reflectance of CD-RWs is lower than that of regular CDs.

MORE ABOUT THIS UNIT

To keep discs clean

Wipe in a straight line from center of disc to
edge. Do not use liquid cleaners, thinners, or
benzene.

To play new discs

Remove any rough areas from the inner and
outer edges of the disc.

MAINTENANCE

How to clean the connectors

Wipe the connectors with
a cotton swab or cloth
moistened with alcohol.

Moisture condensation

Moisture may condense on the lens inside the unit. Eject
the disc and leave the unit turned on for a few hours until
the moisture has evaporated.

Connectors

Do not use the following discs:

Warped disc

Sticker and sticker residue

Stick-on label

Unusual shape

Single CD (8 cm disc)

C-thru Disc (semi-transparent disc)

Transparent or semi-transparent
parts on its recording area

Detaching the control panel

Attaching the control panel

EN_KD-R304_R204[UI]_f.indd 1

EN_KD-R304_R204[UI]_f.indd 1

3/9/08 9:36:38 AM

3/9/08 9:36:38 AM

Advertising
This manual is related to the following products: