Siemens CCMX1315-LP - Manual (Page 53)

Configuration
53
Siemens Building Technologies
Fire Safety & Security Products 01.2009
7.10.4 Backfocus
Click the “Adjust” button, the IRIS of the lens will fully open and a live picture
screen will pop up. Now you can start to adjust the lens back focus and set up the
most detailed video picture using the back focus wheel at the front of the camera
(see Fig. 1). Click the “close” button to exit the screen when finishing the session.
7.10.5 Remote
Set the baud rate and address of the telemetry device for control via the RS485
port.
7.10.6 Temperature
There are two display types for temperature. The internal temperature of the
camera is displayed. If a temperature notification interval has been set an e-mail
notice will be delivered continuously. If the notification interval is set to "0", the e-
mail notice will be delivered only once.