Samsung SCH-a610 - Manual (Page 130)

122
Sounds
Customize audio properties for such things as ringers,
keypad tones, and alerts using the
Sounds menu.
Volume/Vibrate
Use the Volume / Vibrate sub menu to set the default volume
for incoming calls and alarms.
1. In standby mode, press the left soft key ( ) Menu ,
then press , , for the Volume / Vibrate
sub menu.
2. Use the navigation key to highlight Calls or Alarm , then
press .
3. Use the up and down volume keys to select the volume
level (or vibrate mode) for the selected setting.
4. Press to save the setting.
Ringer type
You can assign ringer types and melody tones for calls,
alarms, and other alerts in the
Ringer Type sub menu.
1. In standby mode, press the left soft key ( ) Menu , then
press , , for the Ringer Type sub menu.
The following ringer types appear in the display.
1 Calls 2 Alarm
3 Data 4 Planner
2. Use the navigation key to highlight a ringer type, then
press
. A pop-up menu with the following options
appears in the lower left of the display.
My Melody doesn’t contain ringers or tones, unless you’ve
previously downloaded them over the air.
1 My melody
2 Preloaded
MetroA610.book Page 122 Tuesday, July 6, 2004 3:12 PM