Sanyo VPC-E10EX - Manual (Page 118)

107
English
POST-VIEW SETTING
Specify the duration that the captured image appears on the monitor (post-
view) after the shutter button is pressed.
1
Display the Option Menu (page 102).
2
Select “POST VIEW” and press the SET button.
h The Post View Menu appears.
1sec:
The post-view image is displayed for 1 second.
2sec:
The post-view image is displayed for 2 seconds.
OFF:
The post-view image is not displayed.
3
Select the desired setting, and press the SET button.
h This completes the post-view setting.