Silvercrest WAKE-UP LIGHT KH 2600 - Manual (Page 25)

23
Handling and operation
KH 2600
GB
IE
Switching the alarm off
Snooze function ("SNOOZE" function)
Whilst the alarm is sounding press the SNOOZE ¡
button 8 to temporarily switch off the alarm.
In the display 4 appears the notice .
After 9 minutes the alarm sounds again.
(In the diagram on the right both alarm 1 and alarm 2
are programmed. The alarm 2 goes off and the symbol
blinks.)
Switching the alarm off
When the programmed time is reached the alarm continues to sound until it is
switched off .
Press the ¡ /ALARM OFF button 20 or the button on the remote control
to switch the alarm off .
Press the ¡ button if you have activated the wake-up light function.
NOTICE
The alarm goes off again within 24 hours. ►
Fast switch on/off of the alarm
Prerequisite: The device is in standby mode.
Press the ALARM1/DOWN button ¡ 18 /ALARM2/UP button 16 on the
device or the AL1/AL 2 button on the remote control continually until the
alarm symbol / in the display appears/disappears.
NOTICE
The last selected alarm settings remain saved. ►