Sony DPF-E75 - Manual (Page 34)

34 GB
Changing the settings
You can change the following settings.
• Slideshow Settings
• Auto Power ON/OFF
• Date/time Settings
• General Settings (Listing Order, Sony logo
ON/OFF* etc,.)
* Turning on the Sony logo is the function
only available for DPF-D75/D85/D95.
• Language Setting
• Initialize
1
Press MENU.
2
Press B/b to select the
(Settings) tab.
3
Press v/V to select the item you
want to change and then press .
The setting screen of the selected item is
displayed.
For example, when [Slideshow Settings]
is selected.
4
Press v/V to select the item you
want to change and then press .
This enables you to set each of the items
(page 35).
Note
When the photo frame is, for instance,
displaying a slideshow, some settings of some
items cannot be changed. They are displayed in
gray and cannot be selected.
5
Press v/V to select a setting value
and then press .
Each time you press v/V, the setting value
changes. In the case of a numerical value,
press
V to increase the value and press v
to decrease the value.
If you press , the setting is confirmed.
6
Press MENU.
The menu closes.
Setting procedure
To reset to factory default
settings
1
Press MENU and then select (Settings)
- [Initialize] by pressing B/b/v/V.
2
Press v/V to select [Initialize settings] and
then press .
All adjusted values, except for the clock
settings, are reset to the default settings.
Tip
You can also use the MENU button on the photo
frame.