Savin 4027 - Manual (Page 35)

Copying from the Bypass Tray
25
2
D Enter the horizontal size of the
paper using the number keys,
and then press [#].
Note
❒ If [Horiz] is not highlighted,
press [Horiz].
❒ To register the custom size
entered, press [Program], and
then press [Exit].
E Press [OK].
When copying onto special paper
A Press the {{{{#}}}} key.
B Select the paper type in "Spe-
cial paper".
C Press [OK].
FFFF
Place originals, and then press the
{{{{Start}}}} key.
Note
❒ When copying onto OHP trans-
parencies, remove copies one by
one.
❒ When setting OHP transparen-
cies, thin paper, or adhensive la-
bel paper, Staple, Shift, or Sort
functions cannot be used.
GGGG
When your copy job is finished,
press the
{{{{Clear Modes}}}} key to
clear the settings.
RuC3_ENcopy-F_FM.book Page 25 Monday, June 16, 2003 4:57 PM