Sony BDV-E770W - Manual (Page 11)

11 US
A "/1 (Power)
Turns the surround amplifier on/off.
B S-AIR/STANDBY indicator
You can check the status of wireless
transmission between the main unit and
surround amplifier.
C S-AIR ID switch
Selects the S-AIR ID.
D PAIRING button
Starts pairing.
E PAIRING indicator
Indicates the pairing status.
F SURROUND SELECTOR switch
Selects the mode for the surround amplifier.
G SPEAKERS jacks
H Wireless transceiver (EZW-RT10) slot
Surround amplifier
L R SURROUND SELECTOR
SURROUND PAIRING A B C SURROUND BACK
EZW-RT10
S-AIR ID SPEAKERS
S-AIR/STANDBY
3-16
IMPEDANCE USE
Front panel Rear panel
Indicator Status
Turns green. The system is turned on,
wireless transmission is
activated and surround signals
are transmitting.
Flashes green
quickly. The system is turned on and
wireless transmission is
activated, but surround signals
are not transmitting.
Flashes green
slowly. The system is turned on and
wireless transmission is
deactivated.
Turns red. The surround amplifier is in
standby mode while the system
is in standby mode or wireless
transmission is deactivated.
Turns off. The surround amplifier is
turned off.
Flashes orange. The wireless transceiver is not
connected.
Flashes red. The surround amplifier’s
protection is active.