Sirius Satellite Radio 102405b - Manual (Page 18)

18 SIR-ALP10T Installation Guide
To change the Traffic Icon setting, touch
Traffic Icons , or select it by tilting the
joystick to highlight your selection and press
the
ENTER button.
Show: The selected traffic incident icons
are displayed on the map screen. If Show is
selected, you may also choose the types of
traffic incidents you want to be displayed.
Hide: No traffic incident icons are displayed
on the map screen.
If Show is selected, to change the types of
traffic incident icons which are displayed:
1. Touch Edit , or select it by tilting the
joystick to highlight it and press the
ENTER button.
2. From the list, select (or de-select) the
types of traffic icons. Traffic incident
icon types with a checkmark next to
them will be displayed on the map.
Touch the icon type, or select (or de-
select) by tilting the joystick to highlight
the selection and press the
ENTER
button.
3. Selecting ALL will choose to display all
traffic incident icons.
4. When complete, touch Done , or select
it by tilting the joystick to highlight it and
press the
ENTER button.
Selecting the Default button will choose to
display all traffic incident icons.
Traffic Speed Flow
When the system receives information
about traffic flow (congestion), you can
choose whether to display the traffic flow
information on the map screen.
Traffic flow information is displayed when
the map scale is set between 1/32 mile (50
m) and 5 miles (10 km).
To change the Traffic Speed Flow setting,
touch
Traffic Speed Flow , or select it by
tilting the joystick to highlight your selection
and press the
ENTER button.
Show: Traffic flow information is displayed
on the map screen.
Hide: No traffic flow information is displayed
on the map screen.
Traffic speed flow information is viewable on
the map only for those roads for which this
information is provided by the SIRIUS Traffic
service. Contact SIRIUS for updated
information on traffic flow coverage for your
area.
Detour Based On
When you select Detour in the Traffic
Incident List screen, or press the Detour
button on the remote control, the system
will allow you to detour your route based