Sanyo ECD-T1580DV - Manual (Page 26)

TV OPERATION
Switching to TV mode
Press MODE button on remote
control to select TV mode.
Auto searching TV channels
Press GOTO (AUTO) button for
several seconds on remote control
to start search channel
automatically.
In the course of searching, press
CH button to stop searching.
Selecting channel
- Press CH button on
remote control to choose
channel upward and press
CH button on remote control
to choose channel downward.
- The numeric buttons (0,1~9)
allow you to select the
corresponding channel directly.
- Press digital select button
10+(-/--) cooperatively used with
numeric buttons to select
channel desired.
For example, when you want
select 16 channel, press10+(-/--)
to switch between “-“ and “--“,
when the “--“ appears on the
display, you can press “1
“button then press “6” button to
select 16 channel.
Mute
Press MUTE button on remote
control to cut down sound output.
Press it again to resume the
previous volume mode.
Screen display
Press TITLE (DSP) button on
remote control to display the
current status such as TVch. If you
don’t operate over five seconds, the
information on the screen will
disappear.
Mono/stereo
Press A-B MO/ST button on remote
control to select mono or stereo
mode. You can sometimes improve
reception of distant stations by
selecting mono operation.
Mute
Press MUTE button on remote
control to cut down sound output.
Press it again to resume the previous
volume mode.
When in the default menu, the
“MUTE” will appear on the screen
display.
26
OPERATION
Menu Control operation in radio
mode
When you press MODE to select
radio mode, the menu appears,
Press SEL button on remote control
to select VOLUME, then you can
press CH / buttons to select the
item upward or downward to switch
between VOLUME, BASS, TREBLE,
BALANCE, FADER, LOUD and EQ
mode. Then press VOL+/- buttons
to adjust the selected item. The
corresponding value will show on
the display.
FM1 98.10 MHz
MONO
40 M1 87.50
BASS -2 M2 90.10
TREBLE -2 M3 98.10
BALANCE L-R M4 106.10
FADER F-R M5 108.00
LOUD ON M6 87.50
EQ POP
When you select EQ item, there are
four audio modes to be selected:
FLAT POP CLASSIC ROCK
Menu Control operation in TV
mode
Press SEL button on remote control
to enter sound menu, then you can
press CH / buttons to select the
VOLUME