Smart Technologies ID422w - Manual (Page 24)

14 | CHAPTER 2 – INSTALLING THE SMART PODIUM ID422w
Attaching the Pen
Use the tether to attach the pen to the interactive pen display, so the pen is always
within reach.
NOTE
When you are not using the pen, put it in the storage compartment on the top of
the interactive pen display (see page 34).
To attach the tether to the
pen and the interactive
pen display
1. Thread one loop through the opening at the end of the pen, slip the rest of the
cord through the loop and then carefully pull the cord until the loop is snug.
2. Thread the other loop through the opening on the back of the interactive pen
display. Use either the left or the right opening.
3. Slip the pen and the rest of the tether through the loop. Carefully pull the pen until
the loop is snug.