Spectra Logic 10000 - Manual (Page 32)

Chapter 3. Preparing the Library
32
By default, the Library 2 Slots is set to Off for no split logical library operation
(Figure 3-2).
2. Using the Library 2 Slots field, set the number of slots devoted to the second
logical library.
Tape storage slots are assigned in multiples of 10, so the Library 2 Slots will
need to be set to 10, 20, or 30 (for 20-slot libraries, the only option is 10).
Slots not allocated to the second logical library are automatically allocated to the
first logical library.
3. Set the SCSI Bus 2 ID to a unique number on the second SCSI bus.
This ID will need to be set to a SCSI ID different from the other devices
connected to the SCSI Port 2 connection.
4. To save the changes, press SAVE PARMS .
A message displays: PARAMETERS SAVE, RESTART?
5. Select YES . The library restarts with the new configuration settings.
6. To set the drive emulation settings, read Configuring Library Tape Drive Settings
on page 54.
Figure 3-2 With Library 2 Slots set to off (the default position)
the library is configured as one logical library.