Solid State Logic AMETRIX 1266 - Manual (Page 3)

3333
Contents
Item Item Item Item Page Page Page Page
Safety and Installation Instructions 2 & 3
Introduction 5
Un Pack 5
Key Features 6
Block Diagram 6
Specifications 7
Front Panel Description 8
Rear Panel Description 9
Installation 10 - 12
Setting Up and Operation 13
Synchronisation 14
Frequently asked Questions 15
Conformity & Warranty 4
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
CAUTION: RISK OF ELECTRIC SHOCK. THIS EQUIPMENT HAS MORE THAN ONE POWER CORD. TO REDUCE THE RISKS OF
ELECTRIC SHOCK DISCONNECT BOTH POWER SUPPLY CORDS BEFORE SERVICING
The lightning flash with arrowhead symbol, within equilateral triangle, is intended to alert the user to the
presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of
important operating instructions and maintenance (servicing) instructions in the literature accompanying
the appliance.
Important Safety Information Important Safety Information Important Safety Information Important Safety Information
This apparatus has no mains switch or other user-operated control for disconnecting the AC mains power. The mains
plugs or the appliance couplers (IEC sockets) are used as the disconnect devices. Either device must remain readily
operable and accessible when the apparatus is installed for use.
This unit includes thermally resettable fuses that are integral to the power supply circuitry, but the unit must always
be powered from a supply fitted with an HRC type (High In-Rush Current) fuse with a rating of 1 A.
Important Safety Precautions Important Safety Precautions Important Safety Precautions Important Safety Precautions