Sony RDR-VX420 User Manual

Page 106

Advertising
background image

106

Downmix (DVDs only)

Switches the method for mixing down to two
channels when you play a DVD which has rear
sound elements (channels) or is recorded in Dolby
Digital format. For details on the rear signal
components, see “A Connecting to audio L/R
jacks” on page 18
. This affects the output from the
following jacks:
– LINE 2 OUT (AUDIO L/R), AUDIO OUT L/R

jacks

– LINE 1-TV jack
– DIGITAL AUDIO OUT (OPTICAL or

COAXIAL) jack only when “Dolby Digital” is
set to “D-PCM.”

Audio DRC (Dynamic Range Control) (DVDs
only)

Makes the sound clear when the volume is turned
down when playing a DVD that conforms to
“Audio DRC.” This affects the output from the
following jacks:
– LINE 2 OUT (AUDIO L/R), AUDIO OUT L/R

jacks

– LINE 1-TV jack
– DIGITAL AUDIO OUT (OPTICAL or

COAXIAL) jack only when “Dolby Digital” is
set to “D-PCM.”

Scan Audio (DVDs only)

Note

Sound will be interrupted during Scan Audio.

DV Audio Input

Note

Select “Stereo 2” or “Mix” if you have added a second
audio channel when recording with your digital video
camera.

Line Audio Input

When recording from equipment connected to the
LINE input jack to a DVD disc in this recorder,
select line input audio.
For details about bilingual recording, see page 48.

z

Hint

Audio selected with the connected equipment is recorded
on a disc other than DVD-RWs (VR mode)/DVD-Rs
(VR mode).

Dolby
Surround

Normally select this
position.
Multi-channel audio signals
are output to two channels
for enjoying surround
sounds.

Normal

Multi-channel audio signals
are downmixed to two
channels for use with your
stereo.

Standard

Normally select this.

TV Mode

Makes low sounds clear
even if you turn the volume
down.

Wide
Range

Gives you the feeling of
being at a live performance.

On

Outputs audio signals during
FF1 fast-forward of a DVD
disc with Dolby Digital
soundtracks. For details, see
page 39.

Off

Turns off the function.
No sound is output during
FF1 fast-forward.

Stereo 1

Records original sound only.
Normally select this when
dubbing a DV format tape.

Stereo 2

Records additional audio
only.

Mix

Records both original and
additional sounds.

Stereo

Records stereo sound only.
Select this for discs other
than DVD-RWs (VR mode)/
DVD-Rs (VR mode).

Bilingual

Records the two different
soundtracks on DVD-RWs
(VR mode)/DVD-Rs (VR
mode). You can select either
soundtrack when playing
back the disc.

Advertising