SnapGear 2.0.1 - Manual (Page 105)

Web Cache
101
Create the network share
Figure 8-2
Launch Windows Explorer (Start -> (All) Programs -> Accessories -> Windows
Explorer) and open up a folder or drive to dedicate as a network share for use by the
CyberGuard SG appliance’s web cache.
Begin by disabling simple file sharing for this folder. From the Tools menu, select Folder
Options. Click the View tab and under the Advanced settings section uncheck Use
simple file sharing (Recommended). Click OK.
Next, share the folder. Right click on the folder and select Sharing and Security. Select
Share this folder and note the Share name, you may change this to something easier to
remember if you wish.
Finally, to set the security permissions of the newly created network share, click
Permissions.
If you wish to secure the network share with a username and password (recommended),
click Add and type the user name the account to be used by the CyberGuard SG
appliance and click Check Names then OK.
Select this account, or Everyone if you are not securing the network share with a
username and password, and check Allow next to Full Control. Click OK and OK again
to finish.