Sony DVP-NS700V - Manual (Page 28)

28
Step 3: Connecting the Power Cord
Plug the player and TV power cord (mains lead) into an AC outlet (mains).
Do not connect the AC power cord (mains lead) of your player to the “switched” power source of
an amplifier (receiver). When you turn off the power of your amplifier (receiver), the menu
setting for the player such as Playback Memory may be lost.
Step 4: Quick Setup
Follow the steps below to make the minimum number of basic adjustments for using the player.
To skip an adjustment, press >. To return to the previous adjustment, press ..
1 Turn on the TV.
2 Switch the input selector on the TV to the player.
3 Press POWER on the player and press [ / 1 on the remote.
“Press [ENTER] to run QUICK SETUP” appears at the bottom of the screen. If this message does
not appear, select “QUICK” under “SETUP” in the Control Menu to run Quick Setup (page 74).
R
POWER
ON OFF
SURROUND BNR
PROGRESSIVE SCAN TITLE
DVD MENU
RETURN
DISPLAY
JOG PUSH
ENTER
1 2 3
4 5 6
7 8 9
0 -/--
. / > X / x POWER
. / >
X / x
ENTER
ENTER
[ / 1