Using the travel charger – Sanyo VL-2300 User Manual

Page 36

Advertising
background image

24

Section 2A: Your Sprint PCS Phone – The Basics

Using the Travel Charger

To use the travel charger provided with your phone:

1.

Plug the travel charger into a wall outlet.

2.

Plug the other end of the travel charger into the
accessories connector at the bottom of your phone (with
the battery installed).

Ⅲ

Charging when your phone is turned on:
The battery icon

appears on the display while

charging. The battery icon turns to

when

charging is completed.

Ⅲ

Charging when your phone is turned off:
The battery icon

appears, and the message

“BATTERY CHARGING--Power Off--”is shown on the
display while charging. When the battery is
completely discharged, it may take several minutes
until the message is shown on the display. The
battery icon turns to

, and the message changes

to “CHARGING COMPLETE--Power Off--”when
charging is completed.

It takes approximately 3.5 hours to fully recharge a
completely rundown battery. With the Sprint-approved LiIon
battery, you can recharge the battery before it becomes
completely run down.

Advertising