Samsung VGA1000 - Manual (Page 132)

Section 3: Using PCS Service Features
3B: PCS Vision
124
Net Guard
When you first connect to the Internet, the Net Guard will
appear to confirm that you want to connect. This feature helps
you avoid accidental connections. You can disable the Net
Guard in the future by selecting Always Auto-Connect when the
Net Guard is displayed.
To change your Net Guard settings:
1. Press for Settings.
2. Press for Vision.
3. Press for Net Guard
4. Press the navigation key up or down to select On or Off.
5. Press to Save.
Note: When enabled, the Net Guard appears only once per session.
The Net Guard does not appear if the phone is merely re-connecting due
to a time-out.
PCS Vision Connection Status and Indicators
Your phone's display lets you know the current status of your
PCS Vision connection through indicators which appear at the
top of the screen. The following symbols are used:
Your PCS Vision connection is active (data is being
transferred). Incoming voice calls go directly to voicemail;
outgoing voice calls can be made, but the PCS Vision
connection will terminate.
Your PCS Vision connection is dormant (no data is being
sent or received). Though not currently active, when
dormant the phone can restart an active connection
quickly; voice calls can be made and received.
Your phone is not currently able to access PCS Vision
service features.
If no indicator appears, your phone does not have a current
PCS Vision connection. To launch a connection, see
“Launching a PCS Vision Connection” on page 123.