Sony Qualia 006 - Manual (Page 39)

Setting Up the SXRD Projection TV
37
Se
tting
Up the
SXRD Pr
o
jec
tion T
V
SXRD
2-584-141-12(1)
Cable Box and
Antenna For best results, use this connection if:
❑
Your cable company scrambles some channels, such as premium
channels (which requires you to use a cable box), but does not scramble
all channels.
❑ You do not have a VCR. (If you have a VCR, see pages 41 and 42.)
With this connection you can:
❑
Use the SXRD projection TV’s remote control to change channels
coming through the cable box to the SXRD projection TV’s cable input.
(You must first program the remote control for your specific cable box;
see “Programming the Remote Control” on page 64.)
❑ Use the SXRD projection TV’s remote control to change channels
coming directly into the SXRD projection TV’s VHF/UHF input jack.
Notes on Using This Connection
Before connecting a cable
box, see “Using
CableCARD” on page 58.
✍
This connection will allow you to take advantage of dual picture features
such as Twin View, Freeze, etc.
IN OUT
CABLE VHF/UHF
CATV cable
Rear of SXRD projection TV
Cable box
Antenna Cable
Coaxial
cable
To Do This ... Do This ...
Use the cable box Tune the SXRD projection TV to the channel the cable box is set to
(usually channel 3 or 4) and then use the cable box to switch
channels.
Set up the SXRD projection TV remote control
to operate the cable box Program the remote control. See “Programming the Remote
Control” on page 64.
Activate the remote control to operate the cable
box Press FUNCTION repeatedly until the SAT/CABLE indicator lights
up.
Prevent the accidental switching of TV channels When using the cable box, the SXRD projection TV must stay on the
channel the cable box is set to (usually channel 3 or 4). You can use
the SXRD projection TV’s Channel Fix feature to lock in a specific
channel. For details, see “Using the Channel Menu” on page 116.
Switch the SXRD projection TV’s input between
the cable box and cable
Press ANT to switch back and forth between the SXRD projection
TV’s VHF/UHF (scrambled channels) and CABLE (unscrambled)
inputs.