Samsung SF3000T - Manual (Page 91)

C
ARE AND
M
AINTENANCE
8.2
C HAPTER E IGHT : C ARE AND M AINTENANCE
8
6. Replace the roller in reverse order, and
then close the control panel firmly, until
it clicks into place.
4. Clean the ADF rubber piece also.
5. Carefully wipe the scanning glass with
a soft, dry cloth.
If the glass is very dirty, first wipe
it with a slightly dampened cloth,
then with a dry one. Be careful not
to scratch the glass surface.
0-Chapter 8(GODREJ) 9/20/98 5:16 PM Page 3