Siemens SLI-5310 - Manual (Page 57)

Chapter 3: Accessing the Internet
Numbered IP over ATM (IPoA)
Default Private IP
192.168.1.1
10.3.80.83
(Internet Service Provider)
ISP
DSLAM
Loop
IAD
10.3.95.233
10.3.80.81 STM-1
S/W
Hub BRAS
RDAIUS
Server
AAA
IP over ATM
10.3.80.82
PC(S)
*BRAS: Broadband
Remote Access Server
Public IP Pre-assigned by ISP
Description:
If you apply for multiple IP addresses from your ISP, you can assign these public IP
addresses to the IAD and public server, e.g., Web or FTP server. Typically the first
IP is network address, the second is used as the IAD IP address and the last one is
for subnet broadcasting. Other remaining IP addresses can be assigned to PCs on
the LAN.
The following example uses the LAN IP address ranging from 10.3.80.81 to
10.3.80.86 and the subnet mask for LAN is 255.255.255.248. The WAN IP address
is 10.3.95.233, and the subnet mask for WAN is 255.255.255.248.
Configuration:
1. Start your browser and type 192.168.1.1 in the URL box to access ADSL
web-based manager.
2. Go to Quick Start -Quick Setup. Uncheck Auto Scan Internet Connection
(PVC). Key in the VCI and VPI value, e.g.:
VPI – 0
VCI – 32
Click the Next button.
3. On the Configure Internet Connection -Connection Type page, select IP
over ATM (IPoA) then click Next.
4. On the WAN IP Settings page, select Use the following IP address and Use
the following DNS Server Address, then key in the information that your ISP
offered, e.g.:
WAN IP Address: 10.3.95.233
WAN Subnet Mask: 255.255.255.248
Primary DNS server: 168.95.1.1
Secondary DNS server: 168.95.192.1
Uncheck Enable NAT and click Next.
5. On the Configure LAN side Settings page, key in the information for your
LAN, e.g.,
Primary IP Address: 192.168.1.1
Subnet mask: 255.255.255.0
Start IP Address: 192.168.1.2
End IP Address: 192.168.1.254
49