Sanyo AVL-328 - Manual (Page 32)

Main Frame
PIP Frame
Note:
The TVPC function is available only when the main frame is in VGA (computer) mode and the
vertical frequency is 60 Hz.
4 You may quickly open or close PIP frame by directly by using the PIP button.
4 Audio is from the main picture only.
Viewing the Picture-in-Picture
PIP Operations (Not on all models)
MAIN MENU
PIP On/Off
Source
H Position
V Position
Size
PBP
Press Menu to display the menu main page.
1
Press CH repeatedly to select PIP. +/-
2
Press Enter to access the submenu.
3
Press Enter to select On or Off.
4
The PIP On/Off item will be highlighted automatically.
On
Selecting the Signal Source for the PIP Frame
MAIN MENU
PIP On/Off
Source
H Position
V Position
Size
PBP
RF
Press Menu to display the menu main page.
1
Press CH repeatedly to select PIP. +/-
2
Press Enter to access the submenu.
3
Press CH repeatedly to select Source. +/-
4
Press Enter repeatedly to select signal source for the PIP frame.
5
Note:
You may quickly select signal source for the PIP frame by using the P.S.
You may select RF, Video1, Video2, SVideo or YPbPr for the PIP Frame.
Changing Channels for the PIP Frame
When the PIP frame is in TV mode, press the up or down button to change channels.
When you press the up or down, the unit changes channels in sequence. You will see all the channels that the
unit has memorized.
You will not see channels that were erased.
Setup
Picture
Sound
CH
System
OSD
PIP
Setup
Picture
Sound
CH
System
OSD
PIP
29