Sony HVL-F58AM - Manual (Page 80)

80
To change the test-flash mode (C05)
You can change the flashing method when using test-flash.
Press the f or F button to select the test-flash setting.
• The display is changed in the following order.
[TEST1] y [TEST3] y [TESTM] y . . .
[TEST1] : flashes once at the set light level.
[TEST3] : flashes three times at a specific rate.
[TESTM] : flashes for four seconds at a specific rate.
To change the time to power save (C06)
You can change the time to power save.
Press the f or F button to select the desired time until power save.
• The display is changed in the following order.
[PS 0.5] y [PS 3] y [PS 30] y [PS --] y [PS 0.5] y . . .
[PS 0.5] : changes to power save mode after 30 seconds.
[PS 3] : changes to power save mode after 3 minutes.
[PS 30] : changes to power save mode after 30 minutes.
[PS --] : disables power save mode.
To change the time to power save when using wireless
flash (C07)
You can change the time to power save when using wireless flash.
Press the f or F button to select the time until power save when using
wireless flash.
• The display switches between [PS 60] and [PS --].
[PS 60] : changes to power save mode after 60 minutes.
[PS --] : disables power save mode.
To change the flash range units (C08)
You can change the flash range units displayed.
Press the f or F button to select the units.
• The display switches between [m] and [ft].