Samson XP100 - Manual (Page 17)

15
As shown in the illustration on the left, the top panel of the Expedition Pro XP200 and
XP300 provides a prewired compartment that accommodates any of three differ-
ent Samson wireless receivers: the UM1 or M32 UHF models or the VM1 VHF model.
Output signal from a wireless receiver mounted in an XP300 arrives at channel 2 of the
onboard mixer.
In addition, a number of accessories are available from your local Samson dealer that
allow you to expand the capabilities of your Expedition Pro system. These include:
• The EX500 active subwoofer—the ideal complement to any Expedition Pro enclo-
sure (or to any loudspeaker system, for that matter)—pairs a powerful 500-watt
amplifier with a heavy-duty 15" low frequency driver in order to provide deep low
end response. A built-in stereo electronic crossover allows the EX500 to operate
either in mono or as a common subwoofer in a stereo system. It features an all-
steel grill and rigid corners, as well as an integral 1 3/8" pole-mount receptacle
• The RB 2030 rechargable battery cartridge, which provides up to two hours of
power to either the XP200 or XP300 from its dual Lead-Acid GelCel batteries.
• The MP 1030 mounting bracket, which allows any Expedition Pro enclosure to be
“flown” or mounted on the wall or ceiling using standard OmniMount hard-
ware. For more information, see the “Positioning and Mounting the Expedition
Pro” section on page 12.
Expedition Pro Accessories
XP200/XP300 wireless compartment
(top view)
ENGLISH
15