Sony SonicStage Simple Burner - Manual (Page 22)

22
3
Click BURN.
The “Writing Settings” dialog box
appears. After confirming the writing
speed is in the range of the writing speed
of the CD-R/RW you are using, click
[Start].
Recording starts.
Once recording has started, you cannot
cancel it.
When recording is completed, “Writing
process is complete” appears. Click [OK].
If you cannot click [OK], take out the
CD-R/RW.
Note
Do not start up the SonicStage Simple Burner and other CD-R/RW burner software/OpenMG supporting
software (SonicStage, OpenMG Jukebox, etc.) at the same time on your computer.
If the icon of other CD-R/RW burner software is displayed in the task tray, close that software.
If recording failed
Press BURN again and select a lower recording speed by clicking V in the “Writing
Settings” dialog box.
Then click [START].
Checking information on the ATRAC CD inserted
If you insert an ATRAC CD into the CD-R/RW drive and click [Disc Info], you can get disc
detailed information.