Sanyo DP42740 - Manual (Page 8)

8
Need help? www.sanyoctv.com 1-800-877-5032
CONNECT AC POWER CORD
(120V AC, 60Hz) to the HDTV
and plug in to AC outlet.
GETTING STARTED
INITIAL CHANNEL SEARCH
Before proceeding, please make sure to hook up
your antenna or cable connection and all AV
equipment correctly to your HDTV.
INITIAL CHANNEL/SIGNAL SEARCH
SETUP SCREEN
CHANNEL SEARCH PROGRESS SCREEN
INITIAL ENERGY SAVING
MODE SCREEN
CHANNEL/SIGNAL LIST SCREEN
TURN ON TV (PRESS POWER BUTTON)
Wait for on-screen instructions to set an Initial
Energy Saving Mode, and perform an Initial
Channel/Signal Search.
Press the CH
▲▼ key to perform a channel
search from an Antenna or a direct Cable
connection, and a signal search from devices
hooked up to the HDTV’s AV input jacks.
AV INPUT SELECTION
Press the INPUT key to select the correct AV
input for the video source you wish to watch.
TV SET LOCATION SELECTION:
Select “Home Mode” by pressing the CH
▼ key to set
the HDTV’s backlight to an Energy Star qualified level,
or select “Store Mode” by pressing CH
▲ to set the
backlight to a retail display level.
CHANNEL AND AV SIGNAL SEARCH:
CHANNEL AND SIGNAL SETUP SCREEN
The final setup screen displays analog and digital
channels found as well as AV inputs detected. Pressing
the CH
▲▼ key finalizes the setup process.
NOTE: To repeat the initial setup process press VOL
▼ .
Press the CH ▼ key if you wish to access an
on screen trouble shooting guide.
NOTE: On screen help is also accesible via the
main menu.
ON SCREEN HELP (OPTIONAL)