Siemens Gigaset SL100 - Manual (Page 66)

55
Registering and de-registering handsets
Gigaset SL100 colour / IM_eng / A31008-M1571-R221-2-7619 / registration.fm / 04.11.05
De-registering handsets
You can de-register any registered handset from any registered SL1 colour handset.
Looking for a handset ("Paging")
If you have mislaid your handset you can "page" it with the help of the base station. The
registration/paging key is on front of the base station.
Changing the base station
The following settings may be made if your handset is registered with more than one
base station:
◆ Set to one specific base station, e. g. the base station at home or the base station at
the office.
◆ Set to the base station with the best reception Best Base. This setting will
automatically select whichever base station has the best reception.
v ¢ ì ¢
Select Base
u
Open list of handsets.
s v
Select the handset you wish to de-register (your own
handset is marked with <) and open the menu.
s
De-reg. H/Set No. Select the menu item and confirm.
~
Enter the current system PIN (the factory setting is
0000) and confirm.
[RRRRRRRRRRRRRRRRRRRRR] Yes
Press the display key to confirm the prompt.
The handset you are using
is marked with <.
______ Internal ______1
Call All
INT 1
<
Anna
Î ¨
OK
OK
÷ Press the registration/paging key on the base station
for 1 second. All handsets will ring at the same time
("Paging").
End paging:
÷ Press the registration/paging key on the base station
again for 1 second or the talk key c.
s
Select one of the registered base stations or Best
Base
and confirm.
OK