Sony DSR-DR1000 User Manual
Page 25
25
Location and Function of Parts
When in 2 CH (48 kHz) mode:
When in 4 CH (32 kHz) mode:
You can switch the audio recording mode with the REC
MODE menu item (see page 71). The selection is indicated
by the REC MODE display on the front panel.
2
Analog video/audio signal output section
a VIDEO OUT connectors (BNC type)
There are the following VIDEO OUT connectors for
outputting analog video signals:
• Y/CPST
• R
−
Y/S
−
C
• B
−
Y/S
−
Y
• SUPER
The signals output from these connectors depend on the
setting of the VIDEO OUTPUT menu item (see page 72).
The setting is indicated by the VIDEO indicators in the
OUTPUT signal display section on the front panel.
The analog video signals that can be output from these
connectors are as follows.
When COMPOSITE/S VIDEO is selected:
* When the CHARA. DISPLAY menu item (see page 66) is set to ON
(factory default setting), the SUPER connector outputs a composite
video signal with superimposed text information.
When Y
–
R, B is selected:
* When the CHARA. DISPLAY menu item (see page 66) is set to ON
(factory default setting), the SUPER connector outputs a composite
video signal with superimposed text information.
b AUDIO OUT 1/3 and AUDIO OUT 2/4 connectors
(XLR-3 pin, male)
These connectors output analog audio signals. The output
audio channels are determined by the playback audio mode
and the setting (1/2 CH or 3/4 CH) of the AUDIO
OUTPUT menu item (see page 72) as follows.
When in 2 CH (48 kHz or 44.1 kHz) mode:
When in 4 CH (32 kHz) mode:
The current playback audio mode is indicated by the PB Fs
display on the front panel.
Input
connectors
Audio channels on which input
signals are recorded
AUDIO IN 1/3
Audio channel 1
AUDIO IN 2/4
Audio channel 2
Input
connectors
Audio channels on which input
signals are recorded
AUDIO IN 1/3
Audio channels 1 and 3
AUDIO IN 2/4
Audio channels 2 and 4
VIDEO OUT
Y/CPST
R-Y/S-C
B-Y/S-Y
1/3
2/4
SUPER
AUDIO OUT
MONITOR
1
VIDEO OUT connectors
2
AUDIO OUT 1/3 and
AUDIO OUT 2/4
connectors
3
MONITOR
connector
Connectors
Output signals
Y/CPST
Composite signal
R
−
Y/S
−
C
S
−
C
B
−
Y/S
−
Y
S
−
Y
SUPER*
Composite signal
Connectors
Output signals
Y/CPST
Y signal
R
−
Y/S
−
C
R
−
Y signal
B
−
Y/S
−
Y
B
−
Y signal
SUPER*
Composite signal
Output
connectors
Output audio channels
AUDIO OUT 1/3 Audio channel 1 (when 1/2 CH is
selected) or silent (when 3/4 CH is
selected)
AUDIO OUT 2/4 Audio channel 2 (when 1/2 CH is
selected) or silent (when 3/4 CH is
selected)
Output
connectors
Output audio channels
AUDIO OUT 1/3 Audio channel 1 (when 1/2 CH is
selected) or audio channel 3 (when 3/
4 CH is selected)
AUDIO OUT 2/4 Audio channel 2 (when 1/2 CH is
selected) or audio channel 4 (when 3/
4 CH is selected)