SUPER MICRO Computer X8STE - Manual (Page 73)

Chapter 4: AMI BIOS
4-7
Intel® EIST Technology
EIST (Enhanced Intel SpeedStep Technology) allows the system to automatically
adjust processor voltage and core frequency in an effort to reduce power consump-
tion and heat dissipation.
Please refer to Intel’s web site for detailed information.
The options are Disable: Disable GV3 and Enable: Enable GV3.
Intel® TurboMode Tech (Available if Intel® EIST technology is Enabled)
This feature allows processor cores to run faster than marked frequency in specific
conditions. The options are Disabled and
Enabled.
Intel Turbo Boost Configuration
Turbo Ratio Limit Program
Select Enabled to set the processor's clock ratio in relation to the bus speed.
The options are
Enabled and Disabled. The default value depends on the type
of CPU installed. (For example, the values shown below indicate that an Intel®
Core™ i7 processor 965 Extreme Edition is installed.)
1 - Core Ratio Limit
This increases (multiplies) the processor's core 1 clock speed in relation to
the bus speed. The default setting is
26. Press "+" or "-" on your keyboard to
change this value.
2 ~ 3 - Core Ratio Limit
This increases the processor's core 2~3 clock speeds in relation to the bus
speed. The default setting is
25. Press "+" or "-" on your keyboard to change
this value.
TDC Limit Override
This option will override the system's default electrical current setting for the
processor.
The options are Enabled and Disabled.
TDC Limit Value
This option sets the processor's electrical current value. The default setting is
880. Press "+" or "-" on your keyboard to change this value.
TDP Limit Override
Select Enabled to override the default power setting for the processor. The op-
tions are
Enabled and Disabled.
TDP Limit Value
Use this option to set the processor's power value. The default setting is
1040.
Press "+" or "-" on your keyboard to change this value.