Sharper Image IB-ECB100 - Manual (Page 5)

Setting and Using the Alarm:
For your convenience, two separate alarms may be set to accompany individual
wake-up times.
• al 1 = “Alarm 1”
• al 2 = “Alarm 2”
(Refer to Fig.2)
al 1 Button
Short press al 1 button: Set Alarm mode, Beep, Sound, Off
The Alarm 1 bell icon will appear next to the selected mode when alarm is set.
Press and hold the al 1 button:
1. The “ALARM 1” icon illuminates, time flashes for hour (HH), press “-/+“ button
to change HOUR setting.
2. Press Alarm 1 button to confirm and change to the minute setting. Time
flashes for minutes (MM), press “-/+“ button to change MINUTE setting, wait
for timeout to save and go back to normal mode.
3. The digital display will then show “ALARM 1” icon after you have successfully
set the ALARM 1 time.
al 2 Button
Short press the al2 button: Set Alarm mode, Beep, Sound, Off
The alarm 2 bell icon will appear next to the selected mode when alarm is set.
Press and hold the al 2 button:
1. The “ALARM 2” icon illuminates, time flashes for hour (HH), press “-/+“
button to change hour setting.
2. Press Alarm 2 button to confirm and change to minute setting. Time
flashing for minutes (MM), press “-/+“ button to change Minute setting, wait
for timeout to save and go back to normal mode.
3. The digital display will then show “ALARM 2” icon after you have
successfully set the ALARM 2 time.
Snooze:
When the alarm sounds, press the SNOOZE/TIMER button to snooze. This will
automatically activate snooze time for nine minutes. Press the POWER button
to turn snooze off.
Timer:
When the power is on and you are listening to a nature sound, you may set a
timer so the unit will automatically turn off.
1. Toggle through the SNOOZE/TIMER button until you find the time of your
choice, 15, 30, 45 or 60 minutes.
2. To cancel the timer, toggle through the SNOOZE/TIMER button until the
LED light says “OFF” or press POWER.
(Refer to Fig.2)
8 9