Samsung DVD-P280K - Manual (Page 26)

26
Setting Up the Audio
Options
Audio Options allows you to setup the audio device
and sound status settings depending on the audio
system in use.
1. With the unit in Stop mode, press the MENU button.
2. Press the ➐ ➐/❷ ❷ buttons to select Setup, then press the ❿
or ENTER button.
3. Press the ➐ ➐/❷ ❷ buttons to select Audio Setup, then press
the ❿ or ENTER button.
4. Press the ➐ ➐/❷ ❷ buttons to select the desired item, then
press the ❿ or ENTER button.
❶ Dolby Digital Out
- PCM : Converts to PCM(2CH) audio.
- Bitstream : Outputs Dolby Digital via the digital output.
Select Bitstream when connecting to a Dolby Digital
Decoder.
❷ MPEG-2 Digital Out
- PCM : Converts to PCM(2CH) audio.
- Bitstream : Converts to MPEG-2 Digital Bitstream
(5.1CH or 8CH). Select Bitstream when using the
Digital Audio Output.
❸ Dynamic Compression
- On : To select dynamic compression.
- Off : To select the standard range.
❹ PCM Down Sampling
- On : Select this when the Amplifier connected to the
player is not 96KHz compatible. In this case, the
96KHz signals will be down converted to 48KHZ.
- Off : Select this when the Amplifier connected to the
player is 96KHz compatible. In this case, all signals will
be output without any changes.
Menu Return Enter
Dolby Digital Out :PCM
MPEG-2 Digital Out :PCM
Dynamic Compression :On
PCM Down Sampling :On
Menu Return Enter
Language Setup ❿ ❿
Audio Setup ❿ ❿
Display Setup ❿ ❿
Parental Setup : ❿ ❿
Using the Subtitle Language
1. With the unit in Stop mode, press the MENU button.
2. Press the ➐ ➐/❷ ❷ buttons to select Setup, then press the ❿
or ENTER button.
3. Press the ➐ ➐/❷ ❷ buttons to select Language Setup, then
press the ❿ or ENTER button.
4. Press the ➐ ➐/❷ ❷ buttons to select Subtitle, then press the ❿
or ENTER button.
5. Press the ➐ ➐/❷ ❷ buttons to select the desired language,
then press the ❿ or ENTER button.
- Select “Automatic” if you want the subtitle language to
be the same as the language selected as the audio
language.
- Some discs may not contain the language you select
as your initial language; in that case the disc will use its
original language setting.
- The language is selected and the screen returns to
setup menu.
- To make the setup menu disappear, press the MENU
button.
Using the Audio Language
1. With the unit in Stop mode, press the MENU button.
2. Press the ➐ ➐/❷ ❷ buttons to select Setup, then press the ❿
or ENTER button.
3. Press the ➐ ➐/❷ ❷ buttons to select Language Setup, then
press the ❿ or ENTER button.
4. Press the ➐ ➐/❷ ❷ buttons to select Audio, then press the ❿
or ENTER button.
5. Press the ➐ ➐/❷ ❷ buttons to select the desired language, then
press the ❿ or ENTER button.
- Select “Original” if you want the default soundtrack
language to be the original language the disc is
recorded in.
- If the selected language is not recorded on the disc, the
original pre-recorded language is selected.
- The language is selected and the screen returns to
Language Setup menu.
- To make the setup menu disappear, press the MENU
button.
Player Menu : English
Disc Menu : English
Audio : English
Subtitle : English Subtitle
English
√
Deutsch
Italiano
Automatic
Menu Return Enter
Menu Return Enter
Player Menu : English
Disc Menu : English
Audio : English
Subtitle : English
Audio
English
Original
√
Deutsch
Italiano
LANGUAGE SETUP
AUDIO SETUP
LANGUAGE SETUP