Samsung SNC-B5368 - Manual (Page 13)

1
English
STATIC IP SETUP
manual Network Setup
Run <IP Installer.exe> to display the camera search list.
At the initial startup, both [Auto Set] and [manual Set] will be grayed out.
For cameras found with the IPv6 setting, these buttons will be grayed out as the cameras do not
support this function.
Select a camera in the search list.
Find the MAC (Ethernet) address labeled on
the rear of the camera.
Both the [Auto Set] and [manual Set]
buttons will be activated.
Click [manual Set].
The MANUAL SET dialog appears.
The default values of <IP Address>,
<Subnet mask>, <Gateway>, and <HTTP Port> of the camera will be displayed.
The default <PASSWoRD> is 4321.
In the <ADDRESS> pane, provide the
necessary information.
MAC (Ethernet) Address : The MAC
(Ethernet) address of the applicable
camera will be set automatically so you
don't need to input it manually.
M 
1.
2.
3.
SNC-B5368-ENG-QG.indd 13 2009-08-19 오후 8:42:41