Samsung DVD-HR725 - Manual (Page 26)

26 - English
S
ystem Setup
5 After auto channel scan is completed, auto clock
setting will be started automatically in 10 seconds.
If you want to start auto clock setting immediately,
press OK button. If you do not want to do auto
clock setting, press CANCEL or MENU button.
6 Wait until current date and time are displayed
automatically. If you want to exit auto clock setting,
press MENU button.
7 Check the date and time.
• if it is : Correct, press OK button then the date
and time will be saved. If you don't press the OK
button, the date and time will be saved
automatically after 5 seconds.
• if it is : Incorrect, input correct Time, Date, Year
using …†œ √ buttons or Number buttons. Press
OK button then the date and time will be saved.
When you need to change clock setting, you can
set up it manually. (See page 27)
Plug & Auto Setup
Your HDD & DVD RECORDER will automatically set
itself up when it is plugged in for the first time. TV
stations and clock will be stored in memory. The
process takes a few minutes. Your HDD & DVD
RECORDER will then be ready for use.
1 Connect the RF cable as indicated on page 19.
(Connecting Your HDD & DVD RECORDER to the
TV Using the RF Cable and scart cable.)
To use HDMI cable, make the cable connection
before plugging in the power cord or after finishing
the “plug & autosetup.” Do not connect the HDMI
cable while the “plug & autosetup” is progressing.
2 Plug the HDD & DVD RECORDER into the mains.
“AUTO” in the front panel display flickers.
3 Press the OK button to start the auto setup.
4 Auto channel scan will be started.
• The number of stations automatically stored by the
HDD & DVD RECORDER depends on the number of
stations that it has found.
Auto setup will be started.
Check antenna and TV cable connection.
Yes No
Auto channel scan completed successfully.
Press the [OK] button to auto clock set.
Yes No
10%
Channel Scan
Scanning...
Time Date Auto clock
12 : 00 01 / JAN SAT 2005 On
Please wait. Now setting the clock.
If you want to exit clock setting,
press the [MENU] button.
3-00852A-XEU_25-45_SETUP 2005.6.30 10:2 AM Page 26