Samsung DVD-HD935 - Manual (Page 7)

CONNECTIONS
Choosing a Connection
TV (Normal, Widescreen, Projection, etc..)
Method 1 Method 2 Method 4
Connection to a TV (For Video)
TV
Method 1
Method 2
Method 3
Method 4
12 13
Choosing a Connection
Before Connecting the DVD Player
Connection to an Audio System
Method 1 Method 2
AUDIO
SYSTEM
DVD
PLAYER
DVD
PLAYER
The following show examples of connections commonly used to connect the DVD player
with a TV and other components.
• Always turn off the DVD player, TV, and other components before you
connect or disconnect any cables.
• Refer to the owner’s manual of the additional components you are connecting for
more information on those particular components.
Analog Audio Out Digital Audio Out
2ch Amplifier
Audio Input Jacks
Dolby Digital Decoder
Digital Audio Input Jacks
Basic
Video Good
picture
Method 3
Better
picture
Better
picture Basic Audio
Audio Output
Jacks
OR OR
OR
OR
AV
Cable
S-Video
Cable
Video
Cable
Scart
Cables
(not included)
Video Output
Jack
S-Video
Jack
Component Video
Jacks
Scart Jack
DVD Player + TV with Video Input Jack
DVD Player + TV with S-Video Input Jack
(If S-Video is selected in the VIDEO OUT SELECT.)
DVD Player + TV with Component Video Jacks
(If Component Video is selected in the VIDEO OUT SELECT.)
DVD Player + TV with Scart Input Jack (Audio & Video)
(If Scart jack is selected in the VIDEO OUT SELECT.)
NOTE
• If Scart Jack is selected, S-Video and Component Video will not work.
• If Component Video is selected, S-Video will not work.
• If PROGRESSIVE SCAN is set to on, VIDEO, S-VIDEO and SCART will not work.
DVD Player + 2ch Stereo
Amplifier or Dolby Pro Logic Decoder
DVD Player + Amplifier with Dolby Digital Decoder/DTS Decoder/MPEG-2
Method 1
Method 2