Shure UP4 - Manual (Page 14)

ENGLISH ENGLISH
– 12 –
ATTACHING THE WEATHER-RESISTANT COVER
FIGURE 24
1. Join the narrow ends of the two sections of the weather–resistant cover using the attached Velcro
R
as shown.
FIGURE 25
2. Wrap the joined pieces of the weather cover around the UP4 Receiver BEFORE inserting the UP4 into its mounting bracket.
3. Join the wide ends of the pieces over the control panels, using the attached Velcro strips.
4. Insert the UP4 receiver into the mounting bracket (see Installing the UP4 Receiver).
5. To access the control panel or the battery, flip open the appropriate flap.