Sony LF-X1 - Manual (Page 128)

F:\Joutou\#4090332_Sony_LF-X\4103221121up\4103221121\4103221121LF-
X1\00GB12C08-WW.fm masterpage: Left
LocationFreeTV
4-103-221-12(1)
128
Open the [Settings] window and select [Basic]. The [Basic] window appears. By selecting one of the
options in the [Basic] window, you can perform the following settings.
A Clock
Sets the current date, time, and time zone.
If the clock is not set correctly, some web
pages may not display properly. Make sure
to adjust the clock when it is incorrect.
Also note that if you change the time zone
and select [OK], the monitor will restart.
Note
The set time does not automatically shift to
Daylight Saving Time. Select a time zone from
the list and change to DST.
B Timer
Sets the Sleep Timer and Power Save Timer
Sleep Timer:Sets the monitor to turn off
automatically. If you leave home
or fall asleep without turning off
the monitor, this function turns it
off automatically once the preset
time (30, 60, or 90 minutes) has
elapsed. (The base station does
not turn off.) The Sleep Timer
works even when using
functions other than TV and
video.
Power Save Timer:
Sets the Power Save Timer to
activate and conserve battery
power when you have not used
the monitor for a while. When
the timer activates, the monitor
backlight shuts off and the
screen goes dark.
* The Power Save Timer does not
function while in use with the AC
adapter.
C Stylus Calibration
Calibrates the touch screen and stylus. If the
touch screen registers a different selection
than where you indicate with the stylus, you
can perform this calibration so selections
register accurately.
Note
To select items on the screen, use only the stylus
and do not use other objects such as a pen or a
stick. Doing so can scratch the screen or cause it
to crack.
D Sound
Turns on and off the operation beep that
sounds when you operate the monitor.
E Storage Size
In addition to checking the available
memory on the monitor, you can also check
the memory on a “Memory Stick” (LF-X1)
or a CompactFlash card (LF-X5).
F Initialize (1 page 135)
Allows you to return all settings to the
factory defaults, to reset only the settings for
the monitor or base station, and to initialize
(format) a “Memory Stick” (LF-X1) or a
CompactFlash card (LF-X5).
Basic Settings