Sony LF-X1 - Manual (Page 21)

F:\Joutou\#4090332_Sony_LF-X\4103221121up\4103221121\4103221121LF-
X1\00GB05C01-WW.fm masterpage: Right
LocationFreeTV
4-103-221-12(1)
21
Connecting Other Devices
Setu
p an
d Co
nn
ecti
o
n
s
External devices featuring an A/V output terminal - such as a VCR, AV amplifier, DVR, DVD player/
recorder, or digital cable - can be connected to the base station. You can also connect a digital video
camera or similar device directly to the AV IN jack on the monitor to watch video (LF-X1 only).
Refer also to the operating instructions that came with the connected equipment.
Select [Video 1] in the [Index] window. You can
operate the connected device using the on-screen
remote control on the monitor. Open the [Index]
window, select [Video 1], [Video 2], or [Monitor
Video In] (LF-X1 only) according to the input
terminal to which the device is connected.
Note
If you have connected a DVD player to the base station
via a VCR, the VCR’s copy guard function may distort
or dim the DVD picture. Connect the DVD player
directly to the video input terminal on the base station.
Connecting Other
Devices
to VHF/UHF
output jack
Rear of base station
S-video cable
S-video and A/V cable (not
supplied)
If your VCR is not equipped with
an S-video jack, use a standard
audio/video cable (e.g., VMC-
810S, not supplied).
to the S-video and A/V
output jacks
Audio/video signal flow
Antenna cable
(not supplied)
to IN1 You can also
connect to the IN2 terminal.
Video cable
Audio cable
or
Watching video on a
connected device
Continued