Swann MAXI DAY/NIGHT CAM SR225-4MC-10006 - Manual (Page 2)

Introduction
Package Contents
Installing the Camera Hood
Technical Specifications
Help Desk / Support Details
Warranty Information 2
2
3
3
Back Cover
Back Cover
The Maxi Day/Night Camera is a versatile weather resistant CCD Security camera that
includes 24 Infra-Red LEDs that gives you the capability of viewing images produced under
most lighting conditions, even at night. It can be used to provide your home or office with a
clear picture that can be easily displayed on a DVR, TV, VCR or Security Monitor.
The Maxi Day/Night camera is designed for best performance when used with Swann DVRs
and Security Monitors, but will just as easily work with your existing CCTV Equipment, TV,
VCR or a Computer with a video capture card. The cameras can be used indoors or outdoors.
The Maxi Day/Night cameras can be used for a variety of purposes including monitoring
visitors, staff, property, vehicles, yard, shop or children’s play area.
INSTALLATION
• 4 x Maxi Day/Night Cameras with fixed cable
• 4 x Camera Hood
• 4 x Camera Stands
• 4 x BNC Extension Cables with DC Connection
• 2 x Power Adapters
• 2 x 2-Way Power Splitters
• Security Stickers
• This Quick Start Guide
If any of these items are missing, please contact Swann for assistance.
For connection details consult the Easy Setup Guide included in the pack.
Image Sensor:
Picture Element:
Video System*:
Horizontal Resolution:
S/N Ratio:
Minimum Illumination:
Video Output:
Power Supply:
Video Cable Connector:
Infra-Red LEDs:
Infra-Red LED Wavelength:
Maximum IR Illumination Range:
IR Activation:
Housing Material:
Dimensions:
¼” SuperHAD CCD
PAL - 628 x 582
NTSC - 510 x 492
NTSC - USA & CANADA
PAL - AU, UK & EU
420 TV Lines
>48db
0 Lux (IR on)
1.0v (P-P) @ 75ohm
12V DC
BNC female
24
850nm
66ft (20m)
Switches to B&W in low light
Aluminium Alloy
4” x 2¾” x 6¾”
99mm x 71mm x 169mm
*Please note that this camera ships in the appropriate TV/Video system for the country of sale. In
countries using the NTSC TV standard for the camera will be built to the NTSC standard, and in
countries using PAL TV standard, the camera will be built to the PAL standard. The camera cannot
switched from one standard to the other.
Contents Technical Specifications
Introduction
Package Contents
2 3
NOTE:
All jurisdictions have specific laws and regulations relating to the use of
cameras. Before using any camera for any purpose, it is the buyer’s
responsibility to be aware of all applicable laws and regulations that
prohibit or limit the use of cameras and to comply with the applicable laws
and regulations.
The legality of watching people other than yourself changes from country
to country and even state to state. Contact your local government's
privacy information body or your local Police for more information on what
if any restrictions you may face.
Installing the Camera Hood
Installing the Camera Hood
To fit the Camera Hood use a small Philips Head screwdriver to remove the two screws from
the top mounting block. Once these are removed, place the hood on top of the camera casing
with the slots over the screw holes in the casing. Place the mounting block on top of the hood,
then using the screwdriver screw the two screws back into the casing until the hood is firmly
secured.