Sony Cineza VPL-HS51A - Manual (Page 18)

18
Step 3: Adjusting the Picture Size and Position
2
Press the I/1 (on/standby) switch to turn on the projector.
The ON/STANDBY indicator flashes in green, then lights.
3
Turn on the equipment connected to the projector.
Refer to the operating instructions of the connected equipment.
4
Press INPUT to project the picture on the screen.
Each time you press the button, the input indication changes. (
1 page 24)
Tip
When “Auto Input Search” is set to “On” in the Function
menu, the channel
of the input signal is automatically displayed by pressing the INPUT button.
5
Move both LENS SHIFT dials to adjust the picture position.
ON/
STANDBY
Lights in green.
Video
INPUT
LENS SHIFT
To adjust the vertical
position
To adjust the horizontal position