SysKonnect Wireless LAN Cardbus Adapter SK-54C1 - Manual (Page 36)

36 3 Marvell Configuration Utility
To use WPA 802.1x EAP/TLS, proceed as follows:
1. In the field “Authentication Mode”, select 802.1 X .
2. In the field “Encryption Method”, select TKIP or WEP.
3. From the pulldown menu under “802.1x Authentication Protocol” select EAP/TLS (U SE
C ERTIFICATE ).
4. Click the C ONFIGURE WPA R ADIUS button to configure the security settings for WPA EAP/
TLS.
The window “WPA EAP/TLS Radius Configuration” is displayed.
Figure 32. WPA Radius Configuration
5. Click the B ROWSE button.
The window “Select Certificate” is displayed.
Figure 33. Select Certificate
6. Select the desired certificate.
7. Click S ELECT .
The window “WPA Radius Configuration” is displayed again and the name of the selected
certificate appears in the field “Certificate”.