Subaru Impreza 2.2L MT - Manual (Page 180)

IMPREZA U.S.A. (E)
6-24
To extend the cover, pull the end of the cover out of the cover housing,
then insert its hooks into the catches as shown. To rewind it, unhook it
from the catches and it will rewind automatically. You should hold on to
the cover and guide it back into the cover housing while it is rewinding.
J
To remove the cover housing
HG0190 HG0099,
Match mark
1. Rewind the cover.
2. Pull either sleeve on the end of the cover housing to shorten its
length.
3. Take it off the retainer.
4. Store the cover housing in the luggage area.
J
To install the cover housing
1. Pull either sleeve on the end of the cover housing to shorten the cov-
er’s length.
2. Insert the projections located on the both ends of the sleeve into the
recesses of the retainers.