Connecting to the line 1 in jacks, You can connect a second vcr or similar device, Hook ups and se tti n gs – Sony RDR-VX515 User Manual
Page 27
27
H
ook
ups
and
Se
tti
n
gs
Connecting to the LINE 1 IN jacks
You can connect a second VCR or similar device.
z
Hint
When the connected equipment outputs only monaural sound, connect an audio cord to the LINE 2 IN AUDIO L
(MONO) jack.
Notes
• Do not connect the output jack of this recorder to another equipment’s input jack with the other equipment’s output
jack connected to the input jack of this recorder. Noise (feedback) may result.
• Pictures containing copy protection signals that prohibit any copying cannot be recorded.
• If you pass the recorder signals via the VCR, you may not receive a clear image on your TV screen.
Be sure to connect your VCR to the VCR-DVD recorder and your TV in the order shown below. To watch video tapes,
watch the tapes through a second line input on your TV.
• If the recorder’s power cord is disconnected, you will not be able to view the signals from the connected VCR.
• Do not connect more than one type of video cord between the recorder and your TV at the same time.
LINE OUTPUT
AUDIO
R
L
VIDEO
IN
L
R
VIDEO
AUDIO
OUT
VHF/UHF
LINE OUT
VIDEO
Y
L
PB
R
PR
AUDIO
LINE 1 IN
AUDIO OUT
S VIDEO OUT
COMPONENT
VIDEO OUT
DIGITAL AUDIO OUT
OPTICAL COAXIAL
VIDEO
AUDIO
LINE 1 IN
Other VCR, etc.
VCR-DVD recorder
Audio/video cord
(not supplied)
: Signal flow
to LINE 1 IN
VCR
VCR-DVD recorder
TV
VCR
VCR-DVD recorder
TV
Line input 1
Line input 2