Sony SLV-EZ11AZ - Manual (Page 16)

Getting Started
16
Presetting channels
(For SLV-EZ44AZ/EZ22AZ only)
If you can receive no channels or only a few channels after performing the
EASY G-CODE SET UP function (page 14), preset all receivable channels
automatically using the One Touch Tuning function or the TUNER PRESET
menu.
If some channels could not be preset automatically when using the EASY
G-CODE SET UP function, One Touch Tuning function or TUNER PRESET
menu, preset them manually; if there are any unwanted channels among the
preset ones, you can disable the channels.
(For SLV-EZ11AZ only)
First, we recommend that you preset the receivable channels in your area
using the One Touch Tuning function or the AUTO PRESET in the TUNER
PRESET menu. Then, if some channels could not be preset automatically, set
them manually; if there are any unwanted channels among the preset ones,
you can disable the channels.
Presetting all receivable
channels using the One
Touch Tuning function
1
Press and hold ONE TOUCH TUNING on the VCR for more than
three seconds.
2
1 Press PROGRAM +/– on the VCR so that the indicator for your
country (AUS or NZ) appears in the display window.
2 Press ONE TOUCH TUNING.
The VCR starts presetting the channels.
The WAIT indicator goes off when all the receivable channels are
preset.
ONE TOUCH
TUNING
ONE TOUCH
TUNING
SP
APC
SP
APC
PROGRAM
+ –
PROGRAM +/–
ONE TOUCH
TUNING