Sony SLV-EZ11AZ - Manual (Page 43)

43
Basic Operations
Basic Operations
Recording TV
programmes
using the G-CODE
system (SLV-
EZ44AZ/EZ22AZ
only)
Just enter the G-CODE number, listed in
the TV programme guide, for the
programme you want to record. The
date, times and programme position of
that programme are set automatically.
You can preset up to eight programmes
at a time.
Before you start…
• Check that the VCR clock is set to the
correct time.
• Insert a tape with its safety tab in
place. Make sure the tape is longer
than the total recording time.
• Turn on your TV and set it to the
video channel.
1
Press G-CODE.
? /1
CLEAR
G-CODE
SP/LP
Programme
number
buttons
OK
M
/m/</,
continued
1 2 3
4 5 6
7 8 9
0
G-CODE
G–CODE G–CODE
G–CODE NO. SP / LP
[ SP ] [ – – – – – – – – – ]
SET
SP / LP : [ 0 – 9 ]
: [ SP / LP ]