Sony SLV-EZ11AZ - Manual (Page 62)

62
Additional Information
Specifications
System
Channel coverage
COUNTRY is set to AUS:
VHF AS0 to AS12, AS5A, AS9A
UHF AS28 to AS69
CATV S01 to S05, S1 to S41
COUNTRY is set to NZ:
VHF NZ1 to NZ11
UHF E21 to E69
CATV S01 to S05, S1 to S41
RF output signal
UHF channels: 28 to 69
Aerial out
75-ohm asymmetrical aerial socket
Inputs and outputs
LINE-1 IN
VIDEO IN, phono jack (1 each)
Input signal: 1 Vp-p, 75 ohms, unbalanced,
sync negative
AUDIO IN, phono jack (1 each)
Input level: 327 mVrms
Input impedance: more than 47 kilohms
LINE-1 OUT (SLV-EZ44AZ)
VIDEO OUT, phono jack (1)
Output signal: 1 Vp-p, 75 ohms, unbalanced,
sync negative
AUDIO OUT, phono jack (2)
Standard output: 327 mVrms
Load impedance: 47 kilohms
Output impedance: less than 10 kilohms
LINE-1 OUT (SLV-EZ22AZ/EZ11AZ)
VIDEO OUT, phono jack (1)
Output signal: 1 Vp-p, 75 ohms, unbalanced,
sync negative
AUDIO OUT, phono jack (1)
Standard output: 327 mVrms
Load impedance: 47 kilohms
Output impedance: less than 10 kilohms
General
Power requirements
220 – 240 V AC, 50 Hz
Power consumption
15 W
Operating temperature
5°C to 40°C
Storage temperature
–20°C to 60°C
Dimensions
Approx. 430
Ч
97
Ч
288 mm (w/h/d)
including projecting parts and controls
Mass
Approx. 4.1 kg
Power back-up
Built-in self-charging capacitor
Back-up duration: up to 8 hours at a time
Supplied accessories
Remote commander (1)
R6 (size AA) batteries (2)
Aerial cable (1)
Design and specifications are subject to change
without notice.
E NERGY S TAR ® is a U.S. registered mark.
As an E NERGY S TAR ® Partner, Sony Corporation
has determined that this product meets the
E NERGY S TAR ® guidelines for energy efficiency.