Sega 999-0886 - Manual (Page 27)

24
7 - 2 SYSTEM TEST MODE
The contents of setings chnaged in the TEST mode are stored when the TEST mode
is finished from EXIT in the MENU mode. If the power is turned off before the TEST
mode is finished, the contents of setting chnage become ineffective.
Executing “BACKUP DATA CLEAR” in the SYSTEM TEST MODE does not clear the
BOOKKEEPING data in the GAME TEST MODE.
Entering the TEST mode clears fractional number of coins less than one credit and
BONUS ADDER data.
The SYSTEM TEST mode mainly allows for IC Board functioning check, monitor adjustment, coin assignments, etc.
For details, refer to NAOMI SERVICE MANUAL. The following assignments, however, should be designated for this
product.
CABINET TYPE: 1 PLAYER (S)
MONITOR TYPE: HORIZONTAL
COIN CHUTE TYPE: COMMON
7 - 3 GAME TEST MODE
Press the TEST button to display the SYSTEM TEST MODE MENU.
By pressing the SERVICE button, move the arrow (->) to select the GAME TEST MODE.
Press the TEST button to enter GAME TEST MODE. The screen displays the GAME TEST MODE MENU.
By pressing the SERVICE button, move the arrow (->) to select the desired item. Press the TEST button to execute
the selected item.
Select EXIT and press the TEST button to exit from the GAME TEST MODE and return to the SYSTEM TEST
MODE MENU. Further, select EXIT and press the TEST button to finish SYSTEM TEST MODE and return to the
normal mode.
SYSTEM MENU
RAM TEST
JVS TEST
SOUND TEST
C.R.T. TEST
SYSTEM ASSIGNMENTS
COIN ASSIGNMENTS
BOOKKEEPING
BACK UP DATA CLEAR
CLOCK SETTING
ROM BOARD TEST
>GAME TEST MODE
EXIT
SELECT WITH SERVICE BUTTON
AND PRESS TEST BUTTON TO EXIT
JAMBO SAFARI TEST MENU
INPUT TEST
OUTPUT TEST
SOUND TEST
GAME ASSIGNMENTS
VOLUME SETTING
BOOKKEEPING
BACK UP DATA CLEAR
>EXIT
SELECT WITH SERVICE BUTON
AND PRESS TEST BUTTON