Samsung CLP-510 Series - Manual (Page 235)

C.12
Restoring the Network Configuration
You can return the network configuration to its default settings.
1 In ready mode, press the Menu button ( ) until you see
“Network” on the bottom line of the display.
2 Press the Enter button ( ) to access the menu.
3 Press scroll button ( or ) until “Default Set” displays
on the bottom line. Press the Enter button ( ).
4 Press the Enter button ( ) to confirm the selection.
Reset the Network Interface Card
You can reset the network interface card when a network
problems occurs.
1
In ready mode, press the Menu button ( ) until you see
“Network” on the bottom line of the display.
2 Press the Enter button ( ) to access the menu.
3 Press scroll button ( or ) until “Reset Network”
displays on the bottom line. Press the Enter button ( ).
4 Press the Enter button ( ).
The printer resets the network interface card.
Configuring the Wireless Network
See the instructions supplied with the wireless network interface
card you purchase.
You can easily configure the wireless network environments
using the SetIP program in Windows. See the Wireless Network
User's Guide.
To configure the wireless settings:
1 In ready mode, press the Menu button ( ) until you see
“Network” on the bottom line of the display. Press the Enter
button ( ) to access the menu.
2 Press the Enter button ( ) when “Config Network”
displays on the bottom line.
U SING Y OUR P RINTER ON A N ETWORK