Swisher ZT2460 - Manual (Page 22)

22
SERVICE & ADJUSTMENTS
Deck Belt Routing & Replacement
9 Disconnect spark plug wire
9Apply parking brake
9 Lower the deck to its lowest position
9 Remove the belt covers
9 Disconnect tension idler
9 Roll the belt over the top of the deck pulleys
9 Remove belt
Removal
9 Install new belt by placing it around
the deck pulleys. Refer to routing
diagram below.
9 The belt will be loose at this time
9 Tightly secure the belt tension back
to its original position
9 Reinstall the belt covers
9 Reconnect spark plug wire
Replacement
Front of Unit
For replacement belt part number refer to Replacement Parts
Quick Reference Chart in this manual